TM 1-1270-476-30
4-205
4-19. SOLID STATE CAMERA COVER ASSEMBLY A4 REPAIR (cont)
c. Remove screw (1) securing connectors J1
and J2 to filter retainer (2).
d. Remove two filter retainers (2) and RF filter
(3) by removing two screws (4).
INSTALLATION
e. Remove old corrosion inhibitive sealing and
coating compound from mounting hardware
and filter retainers (para 2-6).
f. Apply corrosion inhibitive sealing and
coating compound to filter retainer faying
surfaces (para 2-6).
g. Install RF filter (3) using two filter retainers
(2) and screws (4).
NOTE
Connectors J1 and J2 shall be free to rotate
slightly on filter retainer. Do not completely
tighten screws.
h. Secure connectors J1 and J2 to filter
retainer using screw (1).
i. Solder filter wiring to A1-1, A1-2, A1-3, and
A1-5. Remove tags.
j. Apply electrical insulating compound over
soldered connections (para 2-6).
k. Dress wiring and secure using lacing tape.
END OF TASK
1
2
232-054A
3
4
(A1-3)
(A1-5)
(A1-2)
(A1-1)
232-053
