TM 1-1270-476-30
4-139
4-7. RELAY BRACKET ASSEMBLY REPAIR (cont)
1. RESISTOR R1 REPLACEMENT
REMOVAL
a. Tag and unsolder wires from resistor R1 (1)
terminals.
b. Remove resistor R1 (1) by removing two
locknuts (2), lockwashers (3), washers (4),
and screws (5).
INSTALLATION
c. Remove corrosion inhibitive sealing and
coating compound from mounting hardware
(para 2-6).
d. Apply corrosion inhibitive sealing and
coating compound to mounting hardware
(para 2-6). Use class 1A application.
e. Install resistor R1 (1) using two screws (5),
washers (4), lockwashers (3), and locknuts
(2).
f. Solder wires to resistor R1 (1) terminals
and remove tags.
g. Have installation inspected.
END OF TASK
