TM 55-1680-320-23 & P
3-36. WINCH ASSEMBLY - REPAIR (cont)
3-36
p.
s.
t.
u.
v.
w.
x.
Install adapter (20) and secure using screws
(21) and washers (22).
InstaIl coupling (17) onto adapter plate (20).
Lubricate packings (18) and install on shaft
of motor (16). Align inertia dump assembly
(19) and install.
Align pin on adapter plate with hole on motor
end bell. Install motor (16) onto adapter plate
(20), ensuring splined end of motor meshes
with inertia dump assembly (19). Secure by
tightening coupling (17),
Install airduct (12) using screws (15). Install
boot (11) using bands (13) and clips (14),
Install limit switch drive assembly (8) using
screws (9) and washers (10). Torque screws
to 12-15 in-lbs.
Install key (7). Install sprocket (5) and secure
using retaining ring (6).
NOTE
Limit switch drive screws (11 may be
loosened to assist in the installation
Of roller chain (4). Tighten screws
after installation.
Position unconnected roller chain (4) onto
sprocket (5) and limit switch drive assembly
(10). Connect chain by installing master link.
Apply loctite compound to threads of screws
(2). Install chain guard cover (1) using screws
and washers (3). Torque screws to 12-15
in-lbs.
FOLLOW-ON MAINTENANCE:
Install winch assembly
(Task 3-37)
END OF TASK
3-124
q.
r .
