TM 55-1660-320-23 & P
3-37. WINCH ASSY - REPLACE (cont)
3-37
b.
c.
Remove boot (7) from motor air duct (8) and
control panel fan plenum (9) by removing clips
(10) and bands (11).
Remove winch assembly (12) from support
assembly (13) by removing bolts (14) and
washers (15).
2. Installation.
a.
b.
c.
Install winch assembly (12) onto support as-
sembly (13) and secure using bolts (14) and
washers (15). Torque bolts to 160-190 in-lbs.
Install boot (7) between motor air duct (8)
and control panel fan plenum (9) and secure
using bands (11) and clips (10).
Install upper support assembly (1), carrying
handle (2) and bracket (6) onto winch assembly
(12) and secure using bolts (3), washers (4)
and spacers (5). Torque bolts to 160-190
in-lbs.
FOLLOW-ON MAINTENANCE:
Install boom head assembly
(Task 2-20)
Install hoist cable
(Task 2-60)
Service winch assembly
(Task 2-45)
Adjust limit switch drive assembly
(Task 2-54)
conduct performance check
(Task 3-7)
END OF TASK
3-126