TM 55-1680-320-23 & P
3-18. BRAKE ASSEMBLY - ADJUST (cont)
3-18
6. If torque required to slip clutch roller exceeds 25 in-lbs., proceed as follows;
a.
b.
c.
Disassemble brake assembly in accordance with Task 3-17.
NOTE
Removal of brake assembly shims lowers torque required to cause clutch roller slippage.
Remove brake assembly shim(s) as required to adjust clutch torque.
Reassemble brake assembly and repeat steps 1 through 4 to ensure proper brake and clutch operation.
7. If clutch roller slippage occurs atless than 21 in-lbs., proceed as follows;
a.
b.
c.
Disassemble brake assembly in accordance with Task 3-17.
NOTE
Addition of brake assembly shims raises torque required to cause clutch roller slippage.
Add brake assembly shim(s) as required to adjust clutch torque.
Reassemble brake assembly and repeat steps 1 through 4 to ensure proper brake and clutch operation.
FOLLOW-ON MAINTENANCE:
Install brake assembly
(Task 3-19)
END OF TASK
3-71
