TM 55-1680-320-23 & P
3-17. BRAKE ASSEMBLY - REPAIR (cont)
3-17
5. Reassembly.
a.
b.
c.
d.
e.
Soak hub (10), backing plate (2), disc assembly
(4) and pressure plate (5) in transmission fluid
for 5 minutes.
NOTE
Lock arrow on clutch roller (9) should
point counterclockwise when viewed
from spring (7) end of hub (10).
Press clutch roller (9) into hub (10).
Install shim (8), springs (7), and key (6) on
hub (2).
Install pressure plate (5), disc assembly (4)
and backing plate (2).
Apply pressure to plate (2) to remove spring
tension. Install retaining ring (3) on hub (10).
Release plate (2).
FOLLOW-ON MAINTENANCE:
Install brake assembly
(Task 3-19)
END OF TASK
3-69
