0139
TM 1-1740-221-13&P&P
SHIPPING - (CONTINUED)
2
3
4
1
SATSCPScg0010
Figure 2. Transportation Support Brackets
NOTE
If CPS cab must be removed for transportation, proceed as follows. If not, go to Step 11.
Rear hitch slide (Figure 2, Item 3) must be lush with rear hitch frame (Figure 2, Item
4) to provide proper mounting clearance.
2.
Install transport support brackets (Figure 2, Item 2) stored in passenger side rear storage compartment, in
two upper holes on each side of rear hitch and secure with attached retaining clips (Figure 2, Item 1).
3.
Disconnect battery (WP 0111).
4.
Remove doors (WP 0023).
01392