TM 1-1740-221-13&P&P
FIELD MAINTENANCE
STEERING CYLINDER
INITIAL SETUP:
Tools and Special Tools
References
General Mechanics Tool Kit (WP 0157, Item 24)
Materials/Parts
Equipment Condition
Anti-Seize Compound (WP 0156, Item 10)
Plugs and Caps (WP 0156, Item 6)
Engine Shut Down
Sealant, Locktite 242 Type II (WP 0156, Item 37)
Personnel Required
91B, Light Wheel Vehicle Mechanic
INSPECTION
Inspect steering cylinder for mount security, hoses and ittings for leaks and any damage affecting serviceability.
END OF TASK
REMOVAL
WARNING
The use of Personal Protective Equipment (PPE) is required when using or handling hazardous
materials associated with operating and maintaining equipment (jet fuel, hydraulic luid, brake
luid, ethylene glycol, cleaning solvents, compressed air, and engine/axle oil). Failure to use
PPE when handling these materials could result in injury or death. If there any prolonged
contact with skin, wash contacted area with soap and water. Remove contaminated clothing
and launder before reuse. if liquid contacts eyes, lush eyes with water immediately.
NOTE
Tag hoses and ittings during the removal process to aid in reinstallation.
It may be necessary to reuse steering cylinder grease itting and hose pipe ittings during
reinstallation.
01371