0072
TM 1-1740-221-13&P&P
AIR FILTERS - (CONTINUED)
1.
Release 3 three spring clamps (Figure 1, Item 4) (one not shown).
NOTE
Note position of ilter cap evacuator (Figure 1, Item 6) seven o clock for reinstallation.
2.
Remove air cleaner assembly ilter cap (Figure 1, Item 5).
3.
Remove primary ilter element (Figure 1, Item 3).
4.
Remove secondary ilter element (Figure 1, Item 2).
5.
Clean inside of air cleaner assembly (Figure 1, Item 1 and 4).
END OF TASK
INSTALLATION
1. Install secondary ilter element (Figure 1, Item 2).
2. Install primary ilter element (Figure 1, Item 3) over secondary element.
NOTE
Install ilter cap with evacuator (Figure 1, Item 6) at the seven o clock position.
3.
Position air cleaner assembly ilter cap (Figure 1, Item 5).
4.
Install 3 three spring clamps (Figure 1, Item 4) (one not shown).
5.
Perform Maintenance Operation Check.
END OF TASK
END OF WORK PACKAGE
00722
