0051
TM 1-1740-221-13&P&P
TEMPERATURE SENDING UNIT (TRANSMISSION) - (CONTINUED)
INSTALLATION
WARNING
The use of Personal Protective Equipment (PPE) is required when using or handling hazardous
materials associated with operating and maintaining equipment (jet fuel, hydraulic luid, brake
luid, ethylene glycol, cleaning solvents, compressed air, and engine/axle oil). Failure to use
PPE when handling these materials could result in injury or death.
1.
Wrap threads of temperature sending unit (Figure 1, Item 3) with anti-seize tape.
2.
Install temperature sending unit (Figure 1, Item 3) on T-Fitting.
3.
Install wire (Figure 1, Item 2).
4.
Install terminal nut (Figure 1, Item 1).
5.
Install center deck plate (WP 0029).
6.
Connect battery (WP 0111).
7.
Perform Maintenance Operation Check.
END OF TASK
END OF WORK PACKAGE
00513/blank