0022
TM 1-1740-221-13&P&P
CREW PROTECTION SYSTEM (CPS) CAB - (CONTINUED)
10. Remove two cap screws (Figure 3, Item 1) and two lock nuts (Figure 3, Item 2) from rear of CPS cab,
passenger side (Figure 3, Item 3).
11. Remove one cap screw (Figure 3, Item 5) and one acorn nut (Figure 3, Item 6) from front of CPS cab,
passenger side (Figure 3, Item 3).
3
2
4
1
6
5
SATSCPS0069
Figure 3. CPS Cab Passenger Side
WARNING
CPS cab weighs 330 lbs. Ensure proper lifting device is used to lift CPS cab.
12. Connect four legs of lifting sling to four ring bolts (Figure 1, Item 1) installed on the top of CPS cab.
13. Lift the CPS cab and remove from vehicle, ensuring CPS cab is level front to back and side to side.
CAUTION
Ensure blocking and bracing material is used to protect CPS cab once removed.
14. If removed for transportation, see (WP 0139), otherwise place CPS cab on suitable support.
15. Disconnect lifting sling and remove four ring bolts (Figure 1, Item 1) installed on outside of CPS cab
(Figure 1, Item 2).
END OF TASK
00223
