TM 1-1730-232-13&P
3-16.5 Hydraulic Ram Replacement, Model 214-706-104-101 (AVUM).
The Hydraulic Ram Assembly is group number 0102 in the MAC. This procedure is applicable to Ground Handling
Wheels Assembly, Model 214-706-104-101. The Hydraulic Ram Assembly is non-repairable and is discarded upon
failure. The numbers in parenthesis refer to figure 3-15.
This task covers:
a.
Remove
b.
Install
c.
Service
INITIAL SETUP
Tools
Tool Kit, Aircraft Mechanics General, NSN 5180-00-323-4692
Drip Pan
Repair Parts
Hydraulic Fluid ............................................................... PIN MIL-H-5606 (item 1, Appendix D)
Repair Parts
Ram Assembly, Hydraulic .............................................. PIN 1730-EG-119
Personnel Required
MOS 67
WARNING
To prevent Injury to personnel or damage to equipment, release all pressure from the hydraulic
pump before starting any maintenance action. Release hydraulic pressure by rapidly rotating the
pressure release knob counterclockwise.
GO TO NEXT PAGE
3-42
