TM 1-1730-232-13&P
3-16.4 Hydraulic Pump Replacement, Model 214-706-104-101 (AVUM)- Continued
6.
Refer to figure 3-14 and remove pump (4), with part number 61780, as follows:
a.
Remove two nuts (16) and washers (17) from U-bolt (18).
b.
Remove U-bolt (18).
c.
Remove two nuts (26), washers (17), and bolts (25).
d.
Grasp pump (4) and lift from cradle assembly (11).
e.
If pump was removed as part of a disassembly procedure, retain pump and attaching hardware for
reinstallation.
f.
If pump was removed because it Is defective, send to AVIM See Chapter 4, Section V, paragraph
4-16.1.
Figure 3-14. Hydraulic Pump, Part No. 61780
GO TO NEXT PAGE
3-39
