0014 00
TM 1-1730-215-13&P
REMOVAL CONTINUED
Figure 2.
Scissors Assembly.
CAUTION
Ensure that platform floor plate is adequately supported before removing hinge pins. Align
hinge pins with access holes in frame.
5.
Remove upper outside roll pin (Figure 2, Item 1) from either side of scissors.
6.
Using suitable pulling tool, remove hinge pin (Figure 2, Item 2), roller (Figure 2, Item 3) and pin shield (Figure
2, Item 4).
7.
Repeat this procedure for other side.
8.
Remove roll pins and hinge pins (Figure 2, Item 1 and 2) from upper inside scissors.
9.
Carefully lift floor plate off scissors assembly.
10. Remove pins (Figure 2, Item 5) and washer (Figure 2, Item 6) from scissors pin (Figure 2, Item 7) and remove
scissors pin (Figure 2, Item 7).
11. Remove roll pins (Figure 2, Item 13), hinge pins (Figure 2, Item 14) rollers (Figure 2, Item 15) and washers
(Figure 2, Item 16) from lower inside scissors (Figure 2, Item 12) and lift scissors from main frame.
12. Remove roll pins (Figure 2, Item 18) and hinge pins (Figure 2, Item 17) from lower outside scissors (Figure 2,
Item 19) and lift scissors from main frame.
INSTALLATION
1.
Position outside scissors (Figure 2, Item 19) into the platform main frame.
2.
Install hinge pins (Figure 2, Item 2) and roll pins (Figure 2, Item 1) on both sides of scissors assembly and
through main frame.
0014 00-2
