TM 1-1270-476-30
2-18
2-6. SEALING COMPOUNDS AND ADHESIVES REMOVAL, APPLICATION, CURING, AND
OUTGASSING (cont)
d. Apply primer using a soft brush or
applicator nozzle supplied with primer.
NOTE
Remove excess uncured primer using a cloth
and trichloroethane.
CURING
e. Cure primer for:
3 to 5 minutes for grade T primer
or
15 to 30 minutes for grade N primer.
END OF TASK
3. SEALING, LOCKING, AND RETAINING
COMPOUND
WARNING
TOLUENE
• Flammable, toxic, irritating. Can cause
breathing problems, eye damage.
• Don’t: Use near flames or sparks, let it get
on skin, or breathe vapors.
• Do: Use in well-ventilated area, close
containers when not using. Wear acid-type
safety goggles and rubber apron.
• If it contacts skin or eyes, wash affected
areas with running water. Get medical help
at once.
WARNING
TRICHLOROETHANE
• Flammable, toxic, irritating. can cause
breathing problems, eye damage.
• At 325°F, gives off phosgene gas, which can
cause death or serious injury.
• Don’t: Use near flames or sparks, let it get
on skin, or breathe vapors.
• Do: Use in well-ventilated area, close
containers when not using. Wear acid-type
safety goggles, rubber gloves, and rubber
apron.
• If it contacts skin or eyes, wash affected
areas with running water. Get medical help
at once.
• If you experience any breathing problems,
get to fresh air at once.
WARNING
SEALING, LOCKING, AND
RETAINING COMPOUND
• Flammable, toxic, irritating. can cause eye
damage.
• Don’t: Use near flames or sparks, or let it get
on skin.
• Do: Use in well-ventilated area, close
containers when not using. Wear acid-type
safety goggles and rubber gloves.
• If it contacts skin or eyes, wash affected
areas with running water. Get medical help
at once.
