TM 1-1270-476-30
4-82
4-5. NIGHT SENSOR ASSEMBLY (NSA) REPAIR (cont)
INSTALLATION
w. Remove old corrosion inhibitive sealing and
coating compound from all mounting
hardware removed in the removal
procedure (para 2-6).
x. Apply corrosion inhibitive sealing and
coating compound on all mounting
hardware just before installation (para 2-6).
Use class 1A application.
y. Install cooler/Dewar assembly (50) and
tighten three captive screws (49).
z. Install sleeve (48) on cooler/Dewar
assembly.
aa. Connect connector W10P2 (47).
