TM 1-1270-476-30
4-269
4-31. HOD HARNESS ASSEMBLY REPAIR (cont)
c. Remove faulty connector (para 2-5).
INSTALLATION
d. Install replacement connector (para 2-5).
e. Install mounting bracket (1) with two screws
(5), washers (4), lockwashers (3), and nuts
(2).
f. Install HOD wiring harness assembly (1
above).
g. Perform followup.
END OF TASK
5. COAXIAL CONNECTOR A2P1
REPLACEMENT
REMOVAL
a. Remove HOD cover assembly (1) by
loosening six captive screws (2).
b. Disconnect connector A2P1 (3) from video
output and focus CCA (4).
c. Remove faulty coaxial connector A2P1 by
cutting coaxial cable from base of
connector. Ensure cable is cut cleanly.