TM 1-1270-476-30
4-41
4-3. TADS TURRET ASSEMBLY REPAIR (cont)
CAUTION
The seal between the day sensor shroud
support assembly and inner gimbal assembly
is fragile. Use care not to damage seal when
removing shroud support assembly.
g. Remove day sensor shroud support
assembly (24) by removing remaining 12
screws (25) and washers (26).
CAUTION
Seal and elevation bearing shim must be
handled with care to prevent bending or
crimping.
h. Remove seal (27) and elevation bearing
shim (28) and set aside in a safe place.
INSTALLATION
i.
Remove old corrosion inhibitive sealing and
coating compound from all mounting
hardware (para 2-6).