4-3. TADS TURRET ASSEMBLY REPAIR (cont)
q. Apply corrosion inhibitive sealing and
coating compound to six screws (12) (para
2-6). Use class 1A application. Apply to
each screw just before installing.
r. Install day sensor harness cable cover (14)
with six screws (12) and washers (13).
s. Apply corrosion inhibitive sealing and
coating compound to screw (17) (para 2-6).
Use class 1A application.
t. Install cushion clamp (15) or mounting plate
(16) with screw (17) and washer (18).
u. Put rubber cushion (10) and day sensor
wire harness on mounting plate (11) and
secure with lacing and tying tape (9).