TM 55-1680-320-23 & P
2-52. INERTIA DUMP ASSEMBLY - REPLACE
2-52
2. Installation.
a.
b.
c.
d.
Lubricate packing (8) and install onto motor
(6). Align inertia dump assembly (9) and in-
stall into adapter plate (10).
Install coupling (7) onto adapter plate (10).
Align pin on adapter plate with hole on motor
end bell.
Install motor (6) onto adapter plate (10), en-
suring splined end of motor meshes with inertia
dump assembly (9). Secure by tightening cou-
pling (7).
Install motor abduct (4) using bolt (5). Install
boot (1) using clips (2) and bands (3).
FOLLOW-ON MAINTENANCE
conduct performance check
(Task 2-7)
END OF TASK
2-110
