TM 55-1680-320-23 & P
2-19. BOOM HEAD ASSEMBLY - REPAIR (cont)
2-19
f.
g.
h.
i.
j.
k.
1.
Remove actuator assembly (15) by removing
bolt (16) and nut (17). Remove spring (18).
Remove cable guide (19) by removing screws
(20).
Remove screws (21 ), washers (22) and nut-
plates (23).
Carefully remove actuator leaves (24) from
microswitch assemblies (25).
Remove side cover assemblies (26) by remov-
ing bolts (27) and washers (28). Remove shims
(29) from bearing bores of covers.
Remove and discard packings (30) from covers
(26).
Remove sight plugs (31), as required, using a
small drive pin.
GO TO NEXT PAGE
2
2-53