0082
TM 1-1740-221-13&P&P
BRAKE VALVE - (CONTINUED)
4.
Position switch wires (Figure 1, Item 13 and 14).
5.
Install brake switch screws (Figure 1, Item 1) and washers (not shown).
6.
Install brake valve mount bolts and nuts (Figure 1, Item 6 and 12) (nuts not shown).
7.
Connect 2 brake lines (Figure 1, Item 7 and 10) and tighten.
8.
Connect 2 brake hoses (Figure 1, Item 5 and 8) and tighten.
9.
Service brake reservoirs (WP 0083).
10.
Perform brake system bleeding procedures (WP 0084).
11.
Lower front of vehicle (WP 0029).
12.
Connect battery negative cables (WP 0111).
13.
Perform Maintenance Operation Check.
END OF TASK
END OF WORK PACKAGE
00823/blank