0047
TM 1-1740-221-13&P&P
TRANSMISSION SPEED SENSOR - (CONTINUED)
1.
Disconnect negative battery cables (WP 0111).
2.
Remove center deck plate (WP 0029).
3.
Disconnect speed sensor wiring connector (Figure 1, Item 1).
4.
Remove speed sensor mount bolt (Figure 1, Item 2).
5.
Remove speed sensor (Figure 1, Item 3).
6.
Remove and discard speed sensor o-ring (Figure 1, Item 4).
END OF TASK
INSTALLATION
1. Install new speed sensor o-ring (Figure 1, Item 4) on speed sensor.
2. Position speed sensor (Figure 1, Item 3) on transmission.
3. Install speed sensor mount bolt (Figure 1, Item 2).
4. Connect speed sensor wiring connector (Figure 1, Item 1).
5. Connect battery (WP 0111).
6. Perform Maintenance Operation Check.
7. Install center deck plate (WP 0029).
END OF TASK
END OF WORK PACKAGE
00472