0046
TM 1-1740-221-13&P&P
TRANSMISSION SHIFT CONTROL - (CONTINUED)
INSTALLATION
Figure 1. Transmission Shift Control (Removal and Installation)
1.
Carefully maneuver shift control assembly (Figure 1, Item 2) in the vehicle.
2.
Connect the two transmission shift control electrical connectors (Figure 1, Item 3 and 4) under the vehicle.
NOTE
Install wire ties on the wiring harness.
3.
Center transmission shift control assembly (Figure 1, Item 2) in opening on console.
4.
Secure shift control assembly with 4 mount washers and screws (Figure 1, Item 1).
5.
Connect battery negative cables (WP 0111).
6.
Lower vehicle (WP 0029).
7.
Perform Maintenance Operation Check.
END OF TASK
END OF WORK PACKAGE
00462
