0031
TM 1-1740-221-13&P&P
POWER PACK ASSEMBLY - (CONTINUED)
8. Remove engine cover (WP 0028).
9. Remove engine cover support (rear) and engine cover supports (RH and LH) (WP 0028).
10. Remove LH/RH toolbox (WP 0028).
2
1
3
4
5
4
WP0023F1
Figure 1. Exhaust Removal Complete
NOTE
Exhaust system can be removed as an assembly from the tow vehicle.
NOTE
To prevent FOD cover turbo exhaust outlet on engine.
11. Remove 4 bolts/lock washers (Figure 1, Item 1) (one not shown) securing forward exhaust pipe
(Figure 1, Item 2) to turbo charger lange.
12. Remove 4 bolts/washers/nuts (Figure 1, Item 4) (one not shown) securing mufler (Figure 1, Item 3) to
engine mounting bracket.
13. Loosen exhaust pipe hanger clamp (Figure 1, Item 5).
14. Remove exhaust system from vehicle.
WARNING
Failure to use the proper lifting equipment (jack) when lifting tow vehicle may result in serious
injury or death.
15. Raise vehicle per complete vehicle raising (WP 0029).
16. Disconnect front drive shaft (WP 0079) from transmission (leave driveshaft connected to axle). Lower drive
shaft to the ground.
17. Disconnect rear drive shaft (WP 0079) from transmission (leave driveshaft connected to axle). Lower drive
shaft to the ground.
00312
