0029
TM 1-1740-221-13&P&P
JACKING PROCEDURES - (CONTINUED)
COMPLETE VEHICLE LOWERING
1. Locate jack in the center of the tractor under the hitch (Figure 1, Item 5).
CAUTION
Raise the tractor by placing the jack under the hitch plate and not the pintle hook. Damage to
the pintle will occur if jack is placed under the hook.
2.
Jack front of tractor until jack stands are free.
3.
Remove the 2 jack stands.
4.
Lower jack so vehicle wheels are on the ground.
5.
Chock front wheels.
6.
Locate jack in the center of the tractor under the hitch (Figure 1, Item 3).
CAUTION
Raise the tractor by placing the jack under the hitch plate and not the pintle hook. Damage to
the pintle will occur if jack is placed under the hook.
7.
Jack rear of tractor until jack stands are free.
8.
Remove the 2 jack stands.
9.
Lower jack so vehicle wheels are on the ground.
10.
Remove jack.
11.
Remove chock blocks.
END OF TASK
END OF WORK PACKAGE
00293/blank