0029
TM 1-1740-221-13&P&P
JACKING PROCEDURES - (CONTINUED)
CAUTION
Raise the tractor by placing the jack under the hitch plate and not the pintle hook. Damage to
the pintle will occur if jack is placed under the hook.
2.
Locate jack in the center of the tractor under the hitch (Figure 1, Item 3).
3.
Jack rear of tractor until the tractor wheels are off of the ground.
4.
Place 2 jack stands under the rear of the tractor located on the corners of the rear bumper. Location is
marked on the rear of the tractor (Figure 1, Item 2).
5.
Lower jack so all of the vehicle weight is on the jack stands.
LOWERING TRACTOR FRONT END
1. Chock front wheels.
CAUTION
Raise the tractor by placing the jack under the hitch plate and not the pintle hook. Damage to
the pintle will occur if jack is placed under the hook.
2.
Locate jack in the center of the tractor under the hitch (Figure 1, Item 5).
3.
Jack front of tractor until jack stands are free.
4.
Remove the 2 jack stands.
5.
Lower jack so vehicle wheels are on the ground.
6.
Remove jack.
7.
Remove chock blocks.
LOWERING TRACTOR REAR END
1. Chock front wheels.
CAUTION
Raise the tractor by placing the jack under the hitch plate and not the pintle hook. Damage to
the pintle will occur if jack is placed under the hook.
2.
Locate jack in the center of the tractor under the hitch (Figure 1, Item 3).
3.
Jack rear of tractor until jack stands are free.
4.
Remove the 2 jack stands.
5.
Lower jack so vehicle wheels are on the ground.
6.
Remove jack.
7.
Remove chock blocks.
COMPLETE VEHICLE RAISING
CAUTION
Raise the tractor by placing the jack under the hitch plate and not the pintle hook. Damage to
the pintle will occur if jack is placed under the hook.
1.
Chock front or rear wheels.
2.
Perform Front and Rear jacking procedures in this Work Package.
00292