0005
TM 1-1740-221-13&P&P
OPERATION UNDER USUAL CONDITIONS - (CONTINUED)
ITEM
INTERVAL
PROCEDURE
NOT FULLY MISSION
ITEM TO BE
NO.
CAPABLE IF:
CHECKED OR
SERVICED
9
Fuel Water
Presence of
Before
Open petcock and drain
Separator
contamination in the
a small amount of fuel
fuel water separator
into a cup or visually
bowl or drained fuel
check the separator
sample.
bowl (WP 0065)
for evidence of
Batteries improperly
10
Before
Battery Cables
Check that the batteries
installed or battery
and Batteries
are properly installed
cables loose or
and the cables are
corroded.
secure with no
corrosion (WP 0110
and WP 0111).
Any lights not operable.
11
All Vehicle Lights
Turn ignition switch
Before
on and verify that all
vehicle lights operate.
Horn inoperable.
12
Horn
Turn ignition switch on
Before
and activate the horn
button and verify the
horn works.
13
If CPS Dash is not
Before
CPS Dash
Inspect CPS Dash for
secure, switches
security, switches and
or fuse block are
fuse block for damage.
damaged, or switches
fail to operate.
14
Axles
Visually inspect axles
Class 3 leaking axles or
Before
for evidence of leaks
loose mounting bolts.
and mount security
15
Visually inspect brake
Any brake luid leak or
Before
Service Brakes
lines and itting for
damage to brake lines,
evidence of leaks or
vehicle inoperative.
damage (WP 0084).
Excessive tread wear
16
Wheels and Tires Visually inspect all tires
Before
for excessive tread
(to the wear bar), cuts,
wear. Tread should not
cracks, bulges, and dry
be worn beyond level
rot exposing the cord.
of wear bar (1/16 in.).
Inspect tire tread for
uneven wear and for
FOD.
Any wheel stud or lug
Check for missing or
nut loose or missing
loose wheel studs and
or any tire rims bent
lug nuts. Tighten loose
excessively or cracked
lug nuts and have unit
wheel assemblies.
maintenance torque to
proper value. Check
wheels for bent or
cracked rims.
Mirrors are missing or
17
Mirrors
Before
Check for mount
damaged.
security, broken or
missing mirrors. Adjust
as necessary.
00052
