TM 1-1730-232-13&P
2-14. REMOVING GROUND HANDLING WHEELS ASSEMBLY FROM A HELICOPTER.
The Ground Handling Wheels Assembly is removed from the helicopter as follows:
1.
Ensure that the helicopter skids are firmly on the ground.
2.
Verify that control valve release knob is in fully counter clockwise and that there is no hydraulic pressure in
the system.
3.
Press and hold the quick release pin locking button.
4.
Remove the quick release pin from the rear cradle clevis and helicopter lifting lug
5.
Rotate the Ground Handling Wheels Assembly upward to disengage the nose pin
6.
Remove the Ground Handling Wheels Assembly to the storage area
2-15
