TM 1-1730-232-13&P
SECTION IV
REMARKS
B-6. EXPLANATION OF COLUMNS IN REMARKS TABLE.
Remarks code numbers are entered in Column 6 of MAC Table B-1, are referenced to code numbers and remarks in
Table B-3 below.
a.
Column 1, Remarks Code. The numerical code in this column is referenced in Column 6 of MAC Table B-1.
b.
Column 2, Remark. This column contains pertinent Information required when performing a maintenance
function listed in MAC Table B-1
Table B-3. Remarks for MAC Column 6
Remarks Code
Remarks
1
Visual inspection without detailed disassembly.
2
End item repair requires replacing a hydraulic system component, cradle assembly, or
wheel assembly.
3
Hydraulic pump P/N BU0953B has UOC.GH1,GH2;
hydraulic pump P/N 61780 has UOC:GH1,GH2,GH3;
when hydraulic pump P/N BU0953B fails, it may be replaced by hydraulic pump P/N
61780.
4
Hydraulic pump P/N BU0953B is not repairable; hydraulic pump P/N 61780 is repaired
upon failure.
5
Replacement procedures for ram assembly are the same for all models of the Ground
Handling Wheels Assembly.
6
Repair allows replacement of axles, bushings, trunnion, release pins, clevis, or cradle.
7
Tire already mounted on rim and bearings installed.
8
Repair allows replacement of tire, tube, bearings, and split rims.
B-9/(B-10 blank)
