TM 1-1730-232-13&P
4-17.2 Cradle Assembly Repair, Model 1730-EG-100 (AVIM).
The Cradle Assembly is group number 02 in the MAC. The cradle assembly is the mounting point for all other
components or assemblies installed on Ground Handling Wheels Assembly, Model 1730-EG-100. The cradle assembly
need not be disassembled to replace the fixed nose pin, quick release pin, or lubrication fittings The cradle assembly
must be disassembled to replace an axle, sleeve bushing, trunnion, or clevis. Disassembly may require the removal of
the wheels, hydraulic pump, hydraulic hoses, and hydraulic rams. Refer to Figure 4-4 while performing the following
repair procedures.
This task covers:
a.
Repair
b.
Disassemble
c.
Assemble
INITIAL SETUP
Tools
Tool Kit, Aircraft Mechanics General NSN 5180-00-323-4692
Shop Set, AVIM, Hydraulic NSN 4920-00-165-1454
Drip Pan
Materials
Grease (item 7, Appendix D)
Repair Parts
(1) Cradle........................................ 1730-EG-101-1
(17) Pin, Release...................................... MS17984C824
(2) Axle, Outer. ............................... 1730-EG-107
(23) Bushing, Pin ..................................... NAS77A8-144
(3) Axle, inner ................................ 1730-EG-109
(24) Bushing, Clevis ................................ NAS77A8-070P
(5) Spacer, Sleeve. ......................... 1730-EG-108
(32) Plug, Alum or Brass .......................... 0.19DIAX0.13
(6) Bolt . .......................................... MS21250-05036
(33) Setscrew .......................................... MS51964-55
(7) Washer ..................................... AN960-616L
(34) Rope, Wire ....................................... SE2939-1455
(8) Nut, Locking .............................. MS21042L6
(35) Washer ............................................. AN960-516L
(9) Trunnion . .................................. 1730-EG-111
(36) Nut, Locking . .................................... MS21042L6
(10) Set Screw ................................ MS51964-94
(37) Bolt ................................................... MS21250-06030
(11) Clevis . .................................... 1730-EG-112
38) Pin ..................................................... 1730-EG-103
(12) Pin, Clevis. .............................. 1730-EG-110
39) Pin, Spring ......................................... MS171598
(13) Fitting, Lubrication .................. MS15001-4
(40)Bushing .............................................. 1730-EG-101-2
(14) Pin, Cotter ............................... MS24665-283
(41) Bushing . ........................................... 1730-EG-101-3
(15 Fitting ....................................... MS15002-1
(42) Swaging Sleeve, Wire Rope.............. 2842687-3
(16) Fitting . .................................... MS15001-2
Personnel Required
MOS 67
GO TO NEXT PAGE
4-23
