0001 00
TM 1-1730-215-13&P
LIST OF ABBREVIATIONS/ACRONYMS CONTINUED
Term
Definition Continued
FM
Field Manual
ft-lb
foot-pound
in-lb
inch-pound
MAC
Maintenance Allocation Chart
max
maximum
min
minimum
mph
mile per hour
NA
not applicable
NIIN
National Item Identification Number
NSN
National Stock Number
PAM
Pamphlet
PMCS
Preventive Maintenance Checks and Services
P/N
Part Number
psi
pounds per square inch
PQDR
Product Quality Deficiency Report
qty
quantity
RPSTL
Repair Parts and Special Tools List
SF
Standard Form
SMR
Source Maintenance and Recoverability
TAMMS
The Army Maintenance Management System
TAMMS-A
The Army Maintenance Management System - Aviation
TB
Technical Bulletin
TM
Technical Manual
U/M
Unit of Measure
UOC
Usable on Code
WP
Work Package
QUALITY OF MATERIAL
Material used for replacement, repair or modification must meet the requirements of this Technical Manual. If qual-
ity of material requirements are not stated in this manual, the material must meet the requirements of the drawings,
standards, specifications or approved engineering change proposals applicable to the subject equipment.
SAFETY, CARE, AND HANDLING
NA
SUPPORTING INFORMATION FOR REPAIR PARTS, SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT
1.
Tools and test equipment required for maintenance are identified in the WP 0021 00, Maintenance
Allocation Chart (MAC). Two special tools are required for resurfacing check ball seats of the hydraulic
pump. These tools are locally manufactured per WP 0018 00, Illustrated List of Manufactured Items
2.
There are no special tools or test equipment required for test or inspection procedures.
3.
Repair parts are listed in WP 0023 00, Repair Parts and Special Tools List (RPSTL) .
0001 00-2
