TM 1-1730-213-13&P
JACK, HYDRAULIC, TRIPOD, 12TON FIXED-HEIGHT
PART NO. 1214-151 NSN 1730-00-554-5436
GENERAL INFORMATION
SCOPE
These instructions are published for the use of operating and maintenance personnel to whom the tripod hy-
draulic jack is assigned. They contain information on operation, lubrication, preventive maintenance, servicing,
and maintenance of the equipment. Uncrating procedures are also provided. No special tools or equipment are
required to perform organizational maintenance of this tripod hydraulic jack.
MAINTENANCE FORMS, RECORDS, AND REPORTS
Department of the Army forms and procedures used for equipment maintenance will be those prescribed by (as
applicable) DA PAM 750-8, Functional Users Manual for the Army Maintenance Management System (TAMMS);
DA PAM 738-751, Functional Users Manual for the Army Maintenance Management Systems - Aviation (TAMMS-
A); or AR 700-138, Army Logistics Readiness and Sustainability
REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR)
If the Jack, Hydraulic, Tripod, 12Ton Fixed-Height, P/N 1214-151 needs improvement, let us know. Send us
an EIR. You, the user, are the only one who can tell us what you do not like about your equipment. Let us know
why you do not like the design or performance. If you have Internet access, the easiest and fastest way to re-
port problems or suggestions is to go to https://aeps.ria.army.mil/aepspublic.cfm (scroll down and choose the
"Submit Quality Deiciency Report" bar). The Internet form lets you choose to submit an EIR, a Product Quality
Deiciency Report (PDQR) or a Warranty Claim Action (WCA). You may also submit your information using an
SF 368 (PQDR). You can send your SF 368 via e-mail, regular mail or facsimile using the addresses/facsimile
numbers speciied in DA PAM 750-8, Functional Users Manual for the Army Maintenance Management System
(TAMMS). We will send you a reply.
CORROSION PREVENTION AND CONTROL (CPC)
CPC of Army material is a continuing concern. It is important that any corrosion problems with this item be reported
so that the problem can be corrected and improvements can be made to prevent the problem in future items. Cor-
rosion speciically occurs with metals. It is an electrochemical process that causes the degradation of metals. It
is commonly caused by exposure to moisture, acids, bases, or salts. An example is the rusting of iron. Corrosion
damage in metals can be seen, depending on the metal, as tarnishing, pitting, fogging, surface residue, and/or
cracking. Plastics, composites, and rubbers can also degrade. Degradation is caused by thermal (heat), oxida-
tion (oxygen), salvation (solvents), or photolytic (light, typically UV) processes. The most common exposures are
excessive heat or light. Damage from these processes will appear as cracking, softening, swelling, and/or break-
ing. SF 368, PQDR should be submitted to the address speciied in DA PAM 750-8, Functional Users Manual for
the Army Maintenance Management System (TAMMS).
DESTRUCTION OF ARMY MATERIEL TO PREVENT ENEMY USE
For procedures to destroy this equipment to prevent its use by the enemy, refer to TM 750-244-1-4, Procedures
for the Destruction of Aviation Ground Support Equipment (FSC 4920).
PREPARATION FOR STORAGE OR SHIPMENT
NA
LIST OF ABBREVIATIONS/ACRONYMS
AMCOM
Aviation Missile Command
AR
Army Regulation
BII
Basic Issue Item
CAGE
Commercial and Government Entity Code
COEI
Component of End Item
CPC
Corrosion Prevention and Control
0001 00-1
