TM 1-1670-260-12&P
0025 00
__________________________________________________________________________________________
Figure 3. Rigging Shackle Assembly
(2) Install both sling eyes from right side heavy weight black/white sling onto the clevis part of the shackle
assembly.
(3) Install both sling eyes from left side light weight blue/white sling onto the clevis part of the shackle
assembly.
(4) Install both free sling eyes from the tail-boom rigging green/white slings onto the clevis part of the
shackle assembly.
CAUTION
Ensure that the sling spacer is installed when the
shackle assembly is assembled.
(5) Place double eye end heavy weight black/white sling (9), Figure 1, View A, to shackle assembly
(Figure 3) and secure shackle assembly as follows:
(a) Insert sling spacer from shackle assembly into the double eye end opening of heavy weight
black/white sling.
(b) Align the holes in the shackle assembly clevis with the hole in the sling spacer.
(c) Once holes are aligned, insert the clevis pin through the holes in the shackle assembly clevis
assembly and sling spacer.
(d) Insert quick-release pin through hole in base of the clevis pin to secure the clevis pin in the clevis.
0025 00-9
