TM 1-1270-476-30
2-35
2-6. SEALING COMPOUNDS AND ADHESIVES REMOVAL, APPLICATION, CURING, AND
OUTGASSING (cont)
CURING
c. Cure for 1 to 2 hours at 67 to 87°F.
END OF TASK
17. BLACK RTV SILICONE ADHESIVE-
SEALANT
WARNING
ACETONE
Flammable, toxic, irritating. Can cause
breathing problems, eye damage. end of
task
Dont: Use near flames or sparks, let it get in
eyes, or breathe vapors.
Do: Use in well-ventilated area, close
containers when not using. Wear acid-type
safety goggles.
If it contacts eyes, wash eyes with running
water. Get medical help at once.
If you experience any breathing problems,
get to fresh air at once.
WARNING
RTV SILICONE ADHESIVE-SEALANT
Toxic, irritating. Can cause breathing
problems, eye damage.
Dont: Let it get on skin, or breathe vapors.
Do: Use in well-ventilated area, close
containers when not using. Wear acid-type
safety goggles, rubber gloves, and rubber
apron.
If it contacts skin or eyes, wash affected
areas with running water. Get medical help
at once.
If you experience any breathing problems,
get to fresh air at once.
REMOVAL
a. Remove cured adhesive-sealant by cutting
or scraping with knife, then wipe with cloth
and acetone.
APPLICATION
b. Apply adhesive-sealant with knife or small
putty knife.
CURING
c. Cure adhesive-sealant for 24 hours at 67 to
87°F.
END OF TASK
