TM 1-1270-476-30
2-30
2-6. SEALING COMPOUNDS AND ADHESIVES REMOVAL, APPLICATION, CURING, AND
OUTGASSING (cont)
i. Maintain sufficient pressure to keep
bonding surfaces in contact throughout
curing.
CAUTION
Do not apply any solvent during trimming and
clean up. Solvents may wick into adhesive
joint and damage the bond.
j. Trim adhesive squeeze out with sharp,
clean knife.
CURING
NOTE
Parts may be moved after 24 hours, provided
they are handled with care.
k. Cure for 72 hours at 67 to 87°F.
END OF TASK
