TM 55-1680-320-23 & P
3-28. BLOWER ASSY/DC MOTOR - REPLACE (cont)
3-28
c.
d.
e.
Remove fan assembly plenum (7) by re-
moving screws (8).
Remove blower /DC motor assembly (9)
from control panel (2) by removing screws
(10).
Remove brackets (11, 12) from blower/DC
motor assembly (9) by removing screws
(13).
2. Installation.
a.
b.
c.
d.
e.
f.
Install brackets (11, 12) onto blower / DC
motor assembly (9) and secure using screws
(13).
Feed wiring through hole in control panel (2)
while lowering blower / DC motor assembly
(9) onto control panel. Secure using screws
(10).
Solder wire braid to control panel (2).
Install fan assembly plenum (7) and secure
using screws (8).
Connect electrical wiring to capacitors (4)
using nuts (5) and washers (6).
Install control panel cover (1) to control
panel (2) and secure using screws (3).
FOLLOW-ON MAINTENANCE:
Install control panel
(Task 2-27)
Conduct operational check
(Task 3-7)
END OF TASK
3-94