TM 55-1680-320-23 & P
3-29. BOOM POSITION SUPPORT ASSY - REPAIR (cont)
3-29
d.
e.
f.
g.
h.
i.
j.
k.
Remove stanchion cover plate (9) from
stanchion tube (10). Push grommet (11) from
cover plate.
Remove lower support assembly (12) and
hook (13) by removing screws (14).
Remove nut-anchor (15) and ring (16), if re-
quired by removing rivets (17).
Remove spring (18) and retainer-hook (19)
from stanchion tube (10) by removing screws
(20).
Remove stud ring (21) from stanchion tube
(10) by removing bolts (22), washers (23) and
nuts (24). Remove stud (25).
Remove plug (26) from stanchion tube (10).
Disconnect reaction arm assembly (27) from
stanchion tube (10) by removing pin (28).
Remove ring (29) by removing screws (30).
Slide switch cover (31) up stanchion tube (10).
GO TO NEXT PAGE
3-96