4-35. LEFT AND RIGHT HANDGRIP (LONGBOW) ASSEMBLIES 2A4 AND 2A5 REPAIR (cont)
5. CIRCUIT CARD ASSEMBLY (CCA) AND
TRANSDUCER (LHG S7; RHG S20)
This procedure is for replacing LHG CCA and
RHG transducer S20 and can be also used for
replacing RHG CCA and LHG transducer S7.
S20 MAN TRK
Components inside the RHG contain
electrostatic discharge sensitive (ESDS)
devices. Refer to paragraph 2-8 for handling
requirements before starting this task to
a. Separate CCA (1) from handgrip by
removing four screws (2) and cutting lacing
and tying tape (3).
b. Disconnect P2 connector (4) from CCA.
c. Remove CCA.
d. Remove transducer (5) by removing screw
e. Tag and unsolder transducer wires (7).