4-18. SOLID STATE CAMERA VIDEO PROCESSOR UNIT REPAIR
This task covers replacement of:
Camera Cover Assembly, A4
Fan Assembly, Day Sensor Camera
Fan Assembly, A42, Night Sensor
Aircraft armament repairman tool set
Aircraft armament technical inspector tool set
Materials (appendix C)
Corrosion inhibitive sealing and coating
compound (Item 15 or 16)
Lens tissue (Item 41)
Masking tape (Item 59)
68J Aircraft Fire Control Repairer
66J30 Aircraft Armament Technical Inspector
Have EETF maintenance personnel perform
While performing these procedures keep all
exposed lens covered with lens paper to
prevent damage to coated optical surfaces.
This assembly contains electrostatic
discharge sensitive devices (ESDS). Refer
to paragraph 2-8 for handling requirements
before starting these tasks, to prevent
damage to the devices.
This task contains the procedures to repair the Day Sensor and Night Sensor Solid State Camera Video
Processor Units by replacing components.
1. CAMERA COVER ASSEMBLY A4
a. Remove two screws (1) and disconnect
power supply connector A6P1 from
b. Remove screw (2) and disconnect
connector A7P1 from connector A4J2.