4-5. NIGHT SENSOR ASSEMBLY (NSA) REPAIR (cont)
Optics scanner assembly must be supported
when screws are removed to prevent
damaging wires and flexible harnesses.
Two people are required to perform steps (2)
thru (5) below.
(2) Support optics scanner assembly (1)
and remove four screws (5) and
(3) Disconnect connector W10P11 (7) by
loosening two screwIocks (8).
Be very careful not to stretch, nick, or crease
flexible harness when disconnecting
(4) Disconnect connectors A23P1 (9) and
A23P2 (10) by loosening four
(5) Remove optics scanner assembly (1)
and place in a safe place.