0153
TM 1-1740-221-13&P&P
MAINTENANCE ALLOCATION CHART (MAC) INTRODUCTION - (CONTINUED)
Field
C
Crew maintenance
F
Maintainer maintenance
Sustainment
L
Specialized Repair Activity (SRA)
H
Below depot maintenance
D
Depot maintenance
NOTE
The "L" maintenance level is not included in column (4) of the MAC. Functions to this level
of maintenance are identiied by work time igure in the "H" column of column (4), and an
associated reference code is used in the REMARKS column (6). This code is keyed to the
remarks and the SRA complete repair application is explained there.
Column (5) Tools and Equipment Reference Code. Column (5) speciies, by code, those
common tool sets (not individual tools), common Test, Measurement and Diagnostic Equipment
(TMDE), and special tools, special TMDE and special support equipment required to perform
the designated function. Codes are keyed to the entries in the tools and test equipment table.
Column (6) Remarks Code. When applicable, this column contains a letter code, in alphabetical
order, which is keyed to the remarks table entries.
Explanation Of Columns In The Tools And Test Equipment Requirements
Column (1) - Tool or Test Equipment Reference Code. The tool or test equipment reference code correlates with
a code used in column (5) of the MAC.
Column (2) - Maintenance Level. The lowest level of maintenance authorized to use the tool or test equipment.
Column (3) - Nomenclature. Name or identiication of the tool or test equipment.
Column (4) - National Stock Number (NSN). The NSN of the tool or test equipment.
Column (5) - Tool Number. The manufacturer s part number.
Explanation Of Columns In The Remarks
Column (1) - Remarks Code. The code recorded in column (6) of the MAC.
Column (2) - Remarks. This column lists information pertinent to the maintenance function being performed
as indicated in the MAC.
END OF WORK PACKAGE
01534