0020 00
TM 1-1730-215-13&P
MAINTENANCE ALLOCATION CHART (MAC) INTRODUCTION CONTINUED
serviceability to an item by correcting specific damage, fault, malfunction or failure in a part, subassem-
bly, module (component or assembly), end item or system.
NOTE
The following definitions are applicable to the "repair" maintenance function:
Services. Inspect, test, service, adjust, align, calibrate, and/or replace.
Fault location/troubleshooting. The process of investigating and detecting the cause of
equipment malfunctioning; the act of isolating a fault within a system or Unit Under Test
(UUT).
Disassembly/assembly. The step-by-step taking apart (or breakdown) of a spare/func-
tional group coded item to the level of its least component identified as maintenance
significant (i.e., assigned an SMR code) for the level of maintenance under consideration.
Actions. Welding, grinding, riveting, straightening, facing, machining and/or resurfacing.
11. Overhaul. That maintenance effort (service/action) prescribed to restore an item to a completely ser-
viceable/operational condition as required by maintenance standards in appropriate technical publica-
tions. Overhaul is normally the highest degree of maintenance performed by the Army. Overhaul does
not normally return an item to like new condition.
12. Rebuild. Those services/actions necessary for the restoration of unserviceable equipment to a like new
condition in accordance with original manufacturing standards. Rebuild is the highest degree of ma-
teriel maintenance applied to Army equipment. The rebuild operation includes the act of returning to
zero those age measurements (e.g., hours/miles) considered in classifying Army equipment/compo-
nents.
Explanation of Entries in the MAC
Group Number and Component/Assembly. The functional groupings in the sample below identify maintenance
significant components, assemblies, subassemblies and modules with the next higher assembly.
Group Number
Component/Assembly Description
04
POWER PLANT
0401
ENGINE, GENERAL Servicing, handling inspection requirements, overhaul
and retirement schedules. External lines and hoses. (As applicable.)
0402
COMPRESSOR SECTION (COLD SECTION MODULE) Rotor, blades,
vanes, impeller, stators, inlet guide vanes, mainframe, particle separa-
tor, bleed valve, bearings, seals, external lines and hoses.
0403
COMBUSTION SECTION (HOT SECTION MODULE) Liners,
nozzles, stators, rotor, seals, couplings, blades.
0404
POWER-TURBINE (POWER TURBINE MODULE) Nozzles,
rotors, blades, exit guide vanes, exhaust frame, drive
shaft, bearings, seals, external lines and hoses.
0405
ACCESSORY GEAR BOX (ACCESSORY SECTION MODULE) Input and
0406
FUEL SYSTEM Fuel control, fuel boost pump, governors, fuel filter assembly,
sequence valve, fuel manifold, fuel nozzle, external lines and hoses.
0407
ELECTRICAL SYSTEM Electrical control units, exciters, thermocou-
ples, ignition harness, electrical cables, history record, torque over
speed sensor, Np sensor, external lines and hoses.
0408
OIL SYSTEM Tanks, oil filter, oil cooler, lube and scavenger
pumps, oil filter bypass sensor, external lines and hoses.
Maintenance Function. Entry lists the functions to be performed on the items listed in Component/Assembly.
0020 00-4
