TM 1-1670-260-12&P
0006 00
__________________________________________________________________________________________
(3) Place both sling eyes from green/white sling attached to the 8 o’clock position blade retention
assembly onto the clevis part of the shackle assembly.
(4) Place the remaining green/white sling eye the from the 2 o’clock position blade retention sling onto
the clevis part of the shackle assembly.
(5) Install one sling eye from green/white sling at the 10 o’clock position blade retention assembly onto
the clevis part of the shackle assembly.
(6) Place both sling eyes from green/white sling attached to the 4 o’clock position blade retention
assembly onto the clevis part of the shackle assembly.
(7) Place the remaining green/white sling eye from the 10 o’clock blade retention sling onto the clevis
part of the shackle assembly.
(8) Place the midpoint of both adjustable length tie-down slings attached to the topside of the blade
sleeves onto the clevis part of the shackle assembly.
Figure 3. Rigging Shackle Assembly
0006 00-9
