0027 00 TM 1-1670-260-12&P ___________________________________________________________________________________________   Table 1. Preventative Maintenance Checks and Services (Continued) (1) Group Number (2) Component to be Inspected (3) Interval (4) Inspection (5) Corrective Action 001005 Shackle Assembly Cable Assembly Before and after each use Inspect cables and loops for damage. Replace cable if frayed. Reinstall quick- release pin and secure cable. Replace cable assembly. Before and after each use Inspect pin for deformations. Check spring locking operation. There shall be no deformation to spring locking clips. Replace if deformed. Replace assembly if spring lock cannot be closed. Before and after each use Inspect safety wire at pivot end of spring lock. If missing, broken, or improperly installed (Figure 2), replace safety wire in accordance with Paragraph 1, Step c. Replace safety wire in accordance with Paragraph 1, Step c. 0011 Sling Link Assemblies As required Check for cleanliness, and serviceability. Clean with PD-680, Type II, dry cleaning solvent or soap and water. 0012 Box Link Assemblies As required Check for cleanliness, and serviceability. Clean with PD-680, Type II, dry cleaning solvent or soap and water. 001201 Box Link Before and after each use Inspect for deformations and cracks. Inspect box link pin holes for deformation. There shall be no deformations or cracks. Replace box link. 001202 Box Link Pin- Lanyard Assembly As Required Inspect lanyard and loops for damage. Replace lanyard if frayed. Reinstall quick- release pin and secure lanyard. Replace lanyard assembly. _00120201 Box Link Pin Assembly Before and after each use Inspect box link pin. There shall be no deformations. Replace box link pin assembly. _00120202 Box Link Cable Assembly Before and after each use Inspect cables and loops for damage. Replace cable if frayed. Reinstall quick- release pin and secure cable. Replace cable assembly. Before and after each use Inspect quick-release pin for deformation and freedom of movement.   Replace quick- release pin if it cannot be made operable by servicing or if deformation is present. 001203 Box Link Quick- Release Pins As required Check for cleanliness, and serviceability. Clean with PD-680, Type II, dry cleaning solvent or soap and water. 0027 00-10