TM 1-1670-260-12&P
0024 00
__________________________________________________________________________________________
Figure 3. Rigging Shackle Assembly
CAUTION
Ensure that the sling spacer is installed when the
shackle assembly is assembled.
(9) Place double eye end of heavy weight black/white sling (6), Figure 1, View A, to shackle assembly
(Figure 3) and secure shackle assembly as follows:
(a) Insert sling spacer from shackle assembly into the double eye end opening of heavy weight
black/white sling.
(b) Align the holes in the shackle assembly clevis with hole in sling spacer.
(c) Once holes are aligned, insert the clevis pin through the holes in the shackle assembly clevis and
sling spacer.
(d) Insert quick-release pin through hole in base of the clevis pin to secure the clevis pin in the clevis.
f.
Carefully lay the rigged shackle assembly on the helicopter, and heavy weight black/white sling to the side that
the recovery helicopter will approach from for easy access during the recovery helicopter hook-up procedure
covered in Paragraph 10 of this WP.
0024 00-9
