TM-1-1670-260-12P Unit Maintenance Aerial Recovery Kit (UMARK) Manual

GENERAL INFORMATION
MAINTENANCE FORMS, RECORDS AND REPORTS
REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR)
UMARK COMPONENT DESCRIPTION
Light Weight Sling Assemblies
Figure 1. UMARK Components
Figure 1. UMARK Components CONT. - TM-1-1670-260-12P_22
Figure 1. UMARK Components CONT. - TM-1-1670-260-12P_23
Figure 1. UMARK Components CONT. - TM-1-1670-260-12P_24
Figure 1. UMARK Components CONT. - TM-1-1670-260-12P_25
Figure 1. UMARK Components CONT.
Figure 1. UMARK Components CONT. - TM-1-1670-260-12P_27
Figure 1. UMARK Components (Sheet 8) CONT.
Blade Pole Assembly (View M)
Lifting Clevis Assembly
DISABLED AH-1 ONE-HOOK SHORT-LINE RECOVERY PROCEDURES
RECOVERY FLIGHT PARAMETERS AND PRECAUTIONS - TM-1-1670-260-12P_33
Table 2. UMARK Components Required - TM-1-1670-260-12P_34
Figure 1. Disabled AH-1 and Recovery Helicopter Rigging - TM-1-1670-260-12P_35
Table 3. Disabled AH-1 and Recovery Helicopter Rigging Key to Figure 1 - TM-1-1670-260-12P_36
Table 3. Disabled AH-1 and Recovery Helicopter Rigging Key to Figure 1 CONT.
Figure 2. Blade Sleeve Assembly Rigging and Installation - TM-1-1670-260-12P_38
Leaving approximately
Figure 3. Rigging Shackle Assembly - TM-1-1670-260-12P_40
Install Tail-Boom Rigging - TM-1-1670-260-12P_41
Figure 4. AH-1 Mast Wedge Assembly - TM-1-1670-260-12P_42
Figure 5. Typical Cargo Hook Thimble Installation (Shown in Double-Eye Configuration) - TM-1-1670-260-12P_43
Allow end of sling line from recovery helicopter - TM-1-1670-260-12P_44
POST RECOVERY KIT PROCEDURES - TM-1-1670-260-12P_45
DISABLED AH-1 ONE-HOOK LONG-LINE RECOVERY PROCEDURES
RECOVERY FLIGHT PARAMETERS AND PRECAUTIONS - TM-1-1670-260-12P_47
COMPONENTS REQUIRED - TM-1-1670-260-12P_48
Figure 1. Disabled AH-1 and Recovery Helicopter Rigging - TM-1-1670-260-12P_49
Table 3. Disabled AH-1 and Recovery Helicopter Rigging Key to Figure 1 - TM-1-1670-260-12P_50
Rig and install blade sleeve assemblies - TM-1-1670-260-12P_51
Figure 2. Blade Sleeve Assembly Rigging and Installation - TM-1-1670-260-12P_52
Rig Shackle Assembly - TM-1-1670-260-12P_53
Figure 3. Rigging Shackle Assembly - TM-1-1670-260-12P_54
Install Tail-Boom Rigging - TM-1-1670-260-12P_55
Figure 4. AH-1 Mast Wedge Assembly - TM-1-1670-260-12P_56
RIG RECOVERY HELICOPTER - TM-1-1670-260-12P_57
HOOK-UP AND RECOVERY FLIGHT OPERATIONS - TM-1-1670-260-12P_58
POST RECOVERY KIT PROCEDURES - TM-1-1670-260-12P_59
DAMAGED AH-1 MAIN ROTOR, MAIN TRANSMISSION, MAIN TRANSMISSION MOUNT DAMAGE ONE-HOOK SHORT-LINE RECOVERY PROCEDURES
PRE-RECOVERY PROCEDURES - TM-1-1670-260-12P_61
COMPONENTS REQUIRED - TM-1-1670-260-12P_62
Figure 1. Damaged AH-1 and Recovery Helicopter Rigging - TM-1-1670-260-12P_63
Table 3. Damaged AH-1 and Recovery Helicopter Rigging Key to Figure 1 - TM-1-1670-260-12P_64
Figure 2. Blade Sleeve Assembly Rigging and Installation - TM-1-1670-260-12P_65
Install Forward Main Rigging - TM-1-1670-260-12P_66
Figure 3. AH-1 Mast Wedge Assembly - TM-1-1670-260-12P_67
Figure 4. Rigging Shackle Assembly - TM-1-1670-260-12P_68
Figure 5. Typical Cargo Hook Thimble Installation (Shown in Double-Eye Configuration) - TM-1-1670-260-12P_69
HOOK-UP AND RECOVERY FLIGHT OPERATIONS - TM-1-1670-260-12P_70
POST RECOVERY KIT PROCEDURES - TM-1-1670-260-12P_71
DAMAGED AH-1 TAIL-BOOM DAMAGED ONE-HOOK LONG-LINE RECOVERY PROCEDURES
RECOVERY FLIGHT PARAMETERS AND PRECAUTIONS
Table 2. UMARK Components Required - TM-1-1670-260-12P_74
Figure 1. Damaged AH-1 and Recovery Helicopter Rigging - TM-1-1670-260-12P_75
Table 3. Damaged AH-1 and Recovery Helicopter Rigging Key to Figure 1 - TM-1-1670-260-12P_76
Rig and install blade sleeve assemblies - TM-1-1670-260-12P_77
Figure 2. Blade Sleeve Assembly Rigging and Installation - TM-1-1670-260-12P_78
Figure 3. AH-1 Mast Wedge Assembly - TM-1-1670-260-12P_79
Figure 4. Rigging Shackle Assembly - TM-1-1670-260-12P_80
Carefully lay the rigged shackle assembly - TM-1-1670-260-12P_81
RIG RECOVERY HELICOPTER - TM-1-1670-260-12P_82
HOOK-UP AND RECOVERY FLIGHT OPERATIONS - TM-1-1670-260-12P_83
POST RECOVERY KIT PROCEDURES - TM-1-1670-260-12P_84
DISABLED AH-64A ONE-HOOK SHORT-LINE RECOVERY PROCEDURES
Table 1. Recovery Helicopter Flight Parameters - TM-1-1670-260-12P_87
COMPONENTS REQUIRED - TM-1-1670-260-12P_88
Figure 1. Disabled AH-64A and Recovery Helicopter Rigging - TM-1-1670-260-12P_89
Table 3. Disabled AH-64A and Recovery Helicopter Rigging Key to Figure 1 - TM-1-1670-260-12P_90
Rig and install blade sleeve assemblies - TM-1-1670-260-12P_91
Figure 2. Blade Sleeve Assembly Rigging and Installation
Rig Shackle Assembly - TM-1-1670-260-12P_93
Figure 3. Rigging Shackle Assembly - TM-1-1670-260-12P_94
Install Tail-Boom Rigging - TM-1-1670-260-12P_95
RIG RECOVERY HELICOPTER - TM-1-1670-260-12P_96
HOOK-UP AND RECOVERY FLIGHT OPERATIONS - TM-1-1670-260-12P_97
POST RECOVERY KIT PROCEDURES - TM-1-1670-260-12P_98
POST RECOVERY DISABLED HELICOPTER PROCEDURES - TM-1-1670-260-12P_99
Table 6 Post-recovery inspection list prior to release for flight - TM-1-1670-260-12P_100
DISABLED AH-64A ONE-HOOK LONG-LINE RECOVERY PROCEDURES
Table 1. Recovery Helicopter Flight Parameters - TM-1-1670-260-12P_102
Table 2. UMARK Components Required - TM-1-1670-260-12P_103
Figure 1. Disabled AH-64A and Recovery Helicopter Rigging - TM-1-1670-260-12P_104
Table 3. Disabled AH-64A and Recovery Helicopter Rigging Key to Figure 1 - TM-1-1670-260-12P_105
Table 3. Disabled AH-64A and Recovery Helicopter Rigging Key to Figure 1 CONT.
Figure 2. Blade Sleeve Assembly Rigging and Installation - TM-1-1670-260-12P_107
Figure 2. Blade Sleeve Assembly Rigging and Installation CONT. - TM-1-1670-260-12P_108
Figure 3. Rigging Shackle Assembly - TM-1-1670-260-12P_109
Install Tail-Boom Rigging - TM-1-1670-260-12P_110
Figure 4. Typical Cargo Hook Thimble Installation (Shown in Double-Eye Configuration) - TM-1-1670-260-12P_111
HOOK-UP AND RECOVERY FLIGHT OPERATIONS - TM-1-1670-260-12P_112
POST RECOVERY KIT PROCEDURES - TM-1-1670-260-12P_113
Table 4 Recovered Helicopter Recovery Parameters (Limitations)
Table 6 Post-recovery inspection list prior to release for flight - TM-1-1670-260-12P_115
DISABLED AH-64A TWO-HOOK SHORT-LINE RECOVERY PROCEDURES
Table 1. Recovery Helicopter Flight Parameters - TM-1-1670-260-12P_117
Table 2. UMARK Components Required - TM-1-1670-260-12P_118
Figure 1. Disabled AH-64A and Recovery Helicopter Rigging - TM-1-1670-260-12P_119
Table 3. Disabled AH-64A and Recovery Helicopter Rigging Key to Figure 1
Table 3. Disabled AH-64A and Recovery Helicopter Rigging Key to Figure 1 CONT.
Figure 2. Blade Sleeve Assembly Rigging and Installation - TM-1-1670-260-12P_122
Figure 2. Blade Sleeve Assembly Rigging and Installation CONT. - TM-1-1670-260-12P_123
Figure 3. Rigging Shackle Assembly - TM-1-1670-260-12P_124
RIG RECOVERY HELICOPTER - TM-1-1670-260-12P_125
HOOK-UP AND RECOVERY FLIGHT OPERATIONS - TM-1-1670-260-12P_126
POST RECOVERY KIT PROCEDURES - TM-1-1670-260-12P_127
POST RECOVERY DISABLED HELICOPTER PROCEDURES - TM-1-1670-260-12P_128
Table 6 Post-recovery inspection list prior to release for flight - TM-1-1670-260-12P_129
DISABLED AH-64D ONE-HOOK SHORT-LINE RECOVERY PROCEDURES
RECOVERY FLIGHT PARAMETERS AND PRECAUTIONS - TM-1-1670-260-12P_131
Table 2. UMARK Components Required - TM-1-1670-260-12P_132
Figure 1. Disabled AH-64D and Recovery Helicopter Rigging - TM-1-1670-260-12P_133
Table 3. Disabled AH-64D and Recovery Helicopter Rigging Key to Figure 1 - TM-1-1670-260-12P_134
Figure 2. Crossbar Assembly - TM-1-1670-260-12P_135
Rig and install blade sleeve assemblies - TM-1-1670-260-12P_136
Figure 3. Blade Sleeve Assembly Rigging and Installation - TM-1-1670-260-12P_137
Figure 3. Blade Sleeve Assembly Rigging and Installation CONT. - TM-1-1670-260-12P_138
Figure 4. Rigging Shackle Assembly - TM-1-1670-260-12P_139
Install Tail-Boom Rigging (Figure 1 and Table 3) - TM-1-1670-260-12P_140
RIG RECOVERY HELICOPTER - TM-1-1670-260-12P_141
HOOK-UP AND RECOVERY FLIGHT OPERATIONS - TM-1-1670-260-12P_142
POST RECOVERY KIT PROCEDURES - TM-1-1670-260-12P_143
POST RECOVERY DISABLED HELICOPTER PROCEDURES - TM-1-1670-260-12P_144
Table 6 Post-recovery inspection list prior to release for flight - TM-1-1670-260-12P_145
DISABLED AH-64D ONE-HOOK LONG-LINE RECOVERY PROCEDURES
RECOVERY FLIGHT PARAMETERS AND PRECAUTIONS - TM-1-1670-260-12P_147
Table 2. UMARK Components Required - TM-1-1670-260-12P_148
Figure 1. Disabled AH-64D and Recovery Helicopter Rigging - TM-1-1670-260-12P_149
Table 3. Disabled AH-64D and Recovery Helicopter Rigging Key to Figure 1
Figure 2. Crossbar Assembly - TM-1-1670-260-12P_151
Figure 2. Crossbar Assembly CONT.
Figure 3. Blade Sleeve Assembly Rigging and Installation - TM-1-1670-260-12P_153
Figure 3. Blade Sleeve Assembly Rigging and Installation CONT. - TM-1-1670-260-12P_154
Rig Shackle Assembly - TM-1-1670-260-12P_155
Install Tail-Boom Rigging - TM-1-1670-260-12P_156
Connect the red/white sling
RIG RECOVERY HELICOPTER - TM-1-1670-260-12P_158
HOOK-UP AND RECOVERY FLIGHT OPERATIONS - TM-1-1670-260-12P_159
POST RECOVERY KIT PROCEDURES - TM-1-1670-260-12P_160
Table 4 Recovered Helicopter Recovery Parameters (Limitations)
Table 6 Post-recovery inspection list prior to release for flight - TM-1-1670-260-12P_162
DISABLED AH-64D TWO-HOOK SHORT-LINE RECOVERY PROCEDURES
Table 1. Recovery Helicopter Flight Parameters - TM-1-1670-260-12P_164
Table 2. UMARK Components Required - TM-1-1670-260-12P_165
Figure 1. Disabled AH-64D and Recovery Helicopter Rigging - TM-1-1670-260-12P_166
Table 3. Disabled AH-64D and Recovery Helicopter Rigging Key to Figure 1 - TM-1-1670-260-12P_167
Figure 2. Crossbar Assembly - TM-1-1670-260-12P_168
Rig and install blade sleeve assemblies - TM-1-1670-260-12P_169
Figure 3. Blade Sleeve Assembly Rigging and Installation - TM-1-1670-260-12P_170
Figure 3. Blade Sleeve Assembly Rigging and Installation CONT. - TM-1-1670-260-12P_171
Figure 4. Rigging Shackle Assembly - TM-1-1670-260-12P_172
Install Tail-Boom Rigging - TM-1-1670-260-12P_173
RIG RECOVERY HELICOPTER - TM-1-1670-260-12P_174
HOOK-UP AND RECOVERY FLIGHT OPERATIONS - TM-1-1670-260-12P_175
POST RECOVERY KIT PROCEDURES - TM-1-1670-260-12P_176
POST RECOVERY DISABLED HELICOPTER PROCEDURES - TM-1-1670-260-12P_177
Table 6 Post-recovery inspection list prior to release for flight - TM-1-1670-260-12P_178
DAMAGED AH-64A/D ONE-HOOK LONG-LINE RECOVERY PROCEDURES
Table 1. Recovery Helicopter Flight Parameters - TM-1-1670-260-12P_180
COMPONENTS REQUIRED - TM-1-1670-260-12P_181
DAMAGED HELICOPTER RIGGING - TM-1-1670-260-12P_182
Figure 1. Damaged AH-64A/D and Recovery Helicopter Rigging
Table 3. Damaged AH-64A/D and Recovery Helicopter Rigging Key to Figure 1
Figure 2. Blade Sleeve Assembly Rigging and Installation - TM-1-1670-260-12P_185
Figure 2. Blade Sleeve Assembly Rigging and Installation CNT.
Figure 3. Rigging Shackle Assembly - TM-1-1670-260-12P_187
Install Tail-Boom Rigging - TM-1-1670-260-12P_188
Figure 4. Typical Cargo Hook Thimble Installation (Shown in Double-Eye Configuration) - TM-1-1670-260-12P_189
HOOK-UP AND RECOVERY FLIGHT OPERATIONS - TM-1-1670-260-12P_190
POST RECOVERY KIT PROCEDURES - TM-1-1670-260-12P_191
DISABLED OH-58A/C ONE-HOOK LONG-LINE RECOVERY PROCEDURES
RECOVERY FLIGHT PARAMETERS AND PRECAUTIONS - TM-1-1670-260-12P_194
Table 2. UMARK Components Required - TM-1-1670-260-12P_195
Figure 1. Disabled OH-58A/C and Recovery Helicopter Rigging
Table 3. Disabled OH-58A/C and Recovery Helicopter Rigging Key to Figure 1
Figure 2. OH-58A/C Mast Wedge Assembly
Rig and install blade sleeve assemblies - TM-1-1670-260-12P_199
Figure 3. Blade Sleeve Assembly Rigging and Installation - TM-1-1670-260-12P_200
Rig Shackle Assembly - TM-1-1670-260-12P_201
Figure 4. Rigging Shackle Assembly - TM-1-1670-260-12P_202
Install Tail-Boom Rigging - TM-1-1670-260-12P_203
RIG RECOVERY HELICOPTER - TM-1-1670-260-12P_204
HOOK-UP AND RECOVERY FLIGHT OPERATIONS - TM-1-1670-260-12P_205
POST RECOVERY KIT PROCEDURES - TM-1-1670-260-12P_206
DAMAGED OH-58A/C MAIN ROTOR, MAIN TRANSMISSION, MAIN TRANSMISSION MOUNT DAMAGE ONE-HOOK LONG-LINE RECOVERY PROCEDURES
Table 1. Recovery Helicopter Flight Parameters - TM-1-1670-260-12P_208
Table 2. UMARK Components Required - TM-1-1670-260-12P_209
Figure 1. Damaged OH-58A/C and Recovery Helicopter Rigging - TM-1-1670-260-12P_210
Table 3. Damaged OH-58A/C and Recovery Helicopter Rigging Key to Figure 1 - TM-1-1670-260-12P_211
Install Forward Main Rigging
Rig and install blade sleeve assemblies - TM-1-1670-260-12P_213
Figure 3. Blade Sleeve Assembly Rigging and Installation - TM-1-1670-260-12P_214
Figure 4. Rigging Shackle Assembly - TM-1-1670-260-12P_215
Carefully lay the rigged shackle assembly - TM-1-1670-260-12P_216
RIG RECOVERY HELICOPTER - TM-1-1670-260-12P_217
HOOK-UP AND RECOVERY FLIGHT OPERATIONS - TM-1-1670-260-12P_218
POST RECOVERY KIT PROCEDURES - TM-1-1670-260-12P_219
POST RECOVERY DAMAGED HELICOPTER PROCEDURES\
DAMAGED OH-58A/C TAIL-BOOM DAMAGED ONE-HOOK LONG-LINE RECOVERY PROCEDURES
Table 1. Recovery Helicopter Flight Parameters - TM-1-1670-260-12P_222
COMPONENTS REQUIRED - TM-1-1670-260-12P_223
Figure 1. Damaged OH-58A/C and Recovery Helicopter Rigging - TM-1-1670-260-12P_224
Table 3. Damaged OH-58A/C and Recovery Helicopter Rigging Key to Figure 1 - TM-1-1670-260-12P_225
Rig and install blade sleeve assemblies as follows: (Figure 2)
Figure 2. Blade Sleeve Assembly Rigging and Installation - TM-1-1670-260-12P_227
Lift up the blade sleeve assembly
Figure 3. Rigging Shackle Assembly - TM-1-1670-260-12P_229
Figure 4. OH-58A/C Mast Wedge Assembly
RIG RECOVERY HELICOPTER - TM-1-1670-260-12P_231
Launch recovery helicopter
POST RECOVERY KIT PROCEDURES - TM-1-1670-260-12P_233
DISABLED OH-58D ONE-HOOK LONG-LINE RECOVERY PROCEDURES
RECOVERY FLIGHT PARAMETERS AND PRECAUTIONS - TM-1-1670-260-12P_235
Table 2. UMARK Components Required - TM-1-1670-260-12P_236
Figure 1. Disabled OH-58D and Recovery Helicopter Rigging
Table 3. Disabled OH-58D and Recovery Helicopter Rigging Key to Figure 1
Figure 2. Sight Wedge Assembly
Figure 3. Crossbar Assembly
Rig and install blade sleeve assemblies - TM-1-1670-260-12P_241
Figure 4. Blade Sleeve Assembly Rigging and Installation
Rig Shackle Assembly - TM-1-1670-260-12P_243
Figure 5. Rigging Shackle Assembly
Install Tail-Boom Rigging - TM-1-1670-260-12P_245
RIG RECOVERY HELICOPTER - TM-1-1670-260-12P_246
HOOK-UP AND RECOVERY FLIGHT OPERATIONS - TM-1-1670-260-12P_247
POST RECOVERY KIT PROCEDURES - TM-1-1670-260-12P_248
POST RECOVERY DISABLED HELICOPTER PROCEDURES - TM-1-1670-260-12P_249
DAMAGED OH-58D MAIN ROTOR, MAIN TRANSMISSION, MAIN TRANSMISSION MOUNT DAMAGE ONE-HOOK LONG-LINE RECOVERY PROCEDURES
RECOVERY FLIGHT PARAMETERS AND PRECAUTIONS - TM-1-1670-260-12P_251
Table 2. UMARK Components Required - TM-1-1670-260-12P_252
DAMAGED HELICOPTER RIGGING - TM-1-1670-260-12P_253
DAMAGED HELICOPTER RIGGING - TM-1-1670-260-12P_254
Table 3. Damaged OH-58D and Recovery Helicopter Rigging Key to Figure 1 - TM-1-1670-260-12P_255
Figure 2. Blade Sleeve Assembly Rigging and Installation - TM-1-1670-260-12P_256
With other hand,
Figure 3. Rigging Shackle Assembly - TM-1-1670-260-12P_258
RIG RECOVERY HELICOPTER - TM-1-1670-260-12P_259
HOOK-UP AND RECOVERY FLIGHT OPERATIONS - TM-1-1670-260-12P_260
POST RECOVERY KIT PROCEDURES - TM-1-1670-260-12P_261
DAMAGED OH-58D TAIL-BOOM DAMAGED ONE-HOOK LONG-LINE RECOVERY PROCEDURES
RECOVERY FLIGHT PARAMETERS AND PRECAUTIONS - TM-1-1670-260-12P_263
COMPONENTS REQUIRED - TM-1-1670-260-12P_264
Install Tail-Section Rigging
Figure 1. Damaged OH-58D and Recovery Helicopter Rigging
Table 3. Damaged OH-58D and Recovery Helicopter Rigging Key to Figure 1 - TM-1-1670-260-12P_267
Figure 2. Crossbar Assembly - TM-1-1670-260-12P_268
Rig and install blade sleeve assemblies - TM-1-1670-260-12P_269
Figure 3. Blade Sleeve Assembly Rigging and Installation - TM-1-1670-260-12P_270
Figure 3. Blade Sleeve Assembly Rigging and Installation CONT. - TM-1-1670-260-12P_271
Rig Shackle Assembly - TM-1-1670-260-12P_272
Figure 4. Rigging Shackle Assembly - TM-1-1670-260-12P_273
Figure 5. Typical Cargo Hook Thimble Installation (Shown in Double-Eye Configuration) - TM-1-1670-260-12P_274
HOOK-UP AND RECOVERY FLIGHT OPERATIONS (Figure 1, and Table 3)
POST RECOVERY KIT PROCEDURES - TM-1-1670-260-12P_276
POST RECOVERY DAMAGED HELICOPTER PROCEDURES
DISABLED UH-1 ONE-HOOK SHORT-LINE RECOVERY PROCEDURES
RECOVERY FLIGHT PARAMETERS AND PRECAUTIONS - TM-1-1670-260-12P_280
COMPONENTS REQUIRED - TM-1-1670-260-12P_281
Figure 1. Disabled UH-1 and Recovery Helicopter Rigging - TM-1-1670-260-12P_282
Table 3. Disabled UH-1 and Recovery Helicopter Rigging Key to Figure 1 - TM-1-1670-260-12P_283
Rig and install blade sleeve assemblies - TM-1-1670-260-12P_284
Figure 2. Blade Sleeve Assembly Rigging and Installation - TM-1-1670-260-12P_285
Rig Shackle Assembly - TM-1-1670-260-12P_286
Figure 3. Rigging Shackle Assembly - TM-1-1670-260-12P_287
Install Tail-Boom Rigging - TM-1-1670-260-12P_288
Figure 4. UH-1 Square Wedge Assembly
RIG RECOVERY HELICOPTER - TM-1-1670-260-12P_290
HOOK-UP AND RECOVERY FLIGHT OPERATIONS - TM-1-1670-260-12P_291
POST RECOVERY KIT PROCEDURES - TM-1-1670-260-12P_292
DISABLED UH-1 ONE-HOOK LONG-LINE RECOVERY PROCEDURES
RECOVERY FLIGHT PARAMETERS AND PRECAUTIONS - TM-1-1670-260-12P_294
COMPONENTS REQUIRED - TM-1-1670-260-12P_295
Figure 1. Disabled UH-1 and Recovery Helicopter Rigging - TM-1-1670-260-12P_296
Table 3. Disabled UH-1 and Recovery Helicopter Rigging Key to Figure 1 - TM-1-1670-260-12P_297
Rig and install blade sleeve assemblies - TM-1-1670-260-12P_298
Figure 2. Blade Sleeve Assembly Rigging and Installation - TM-1-1670-260-12P_299
Figure 2. Blade Sleeve Assembly Rigging and Installation CONT. - TM-1-1670-260-12P_300
Figure 3. Rigging Shackle Assembly - TM-1-1670-260-12P_301
Install Tail-Boom Rigging (Figure 1 and Table 3) - TM-1-1670-260-12P_302
Drogue Chute Installation
RIG RECOVERY HELICOPTER - TM-1-1670-260-12P_304
HOOK-UP AND RECOVERY FLIGHT OPERATIONS - TM-1-1670-260-12P_305
POST RECOVERY KIT PROCEDURES - TM-1-1670-260-12P_306
DAMAGED UH-1 ONE-HOOK LONG-LINE RECOVERY PROCEDURES
PRE-RECOVERY PROCEDURES - TM-1-1670-260-12P_308
COMPONENTS REQUIRED - TM-1-1670-260-12P_309
Figure 1. Damaged UH-1 and Recovery Helicopter Rigging
Table 3. Damaged UH-1 and Recovery Helicopter Rigging Key to Figure 1
Rig and install blade sleeve assemblies - TM-1-1670-260-12P_312
Figure 2. Blade Sleeve Assembly Rigging and Installation - TM-1-1670-260-12P_313
Figure 3. UH-1 Square Wedge Assembly
Figure 4. Rigging Shackle Assembly - TM-1-1670-260-12P_315
Carefully lay the rigged shackle assembly - TM-1-1670-260-12P_316
RIG RECOVERY HELICOPTER - TM-1-1670-260-12P_317
HOOK-UP AND RECOVERY FLIGHT OPERATIONS - TM-1-1670-260-12P_318
POST RECOVERY KIT PROCEDURES - TM-1-1670-260-12P_319
DISABLED UH-60 ONE-HOOK SHORT-LINE RECOVERY PROCEDURES
RECOVERY FLIGHT PARAMETERS AND PRECAUTIONS - TM-1-1670-260-12P_322
COMPONENTS REQUIRED - TM-1-1670-260-12P_323
Figure 1. Disabled UH-60 and Recovery Helicopter Rigging - TM-1-1670-260-12P_324
Table 3. Disabled UH-60 and Recovery Helicopter Rigging Key to Figure 1 - TM-1-1670-260-12P_325
Rig and install blade sleeve assemblies - TM-1-1670-260-12P_326
Figure 2. Blade Sleeve Assembly Rigging and Installation - TM-1-1670-260-12P_327
Rig Shackle Assembly - TM-1-1670-260-12P_328
Figure 3. Rigging Shackle Assembly - TM-1-1670-260-12P_329
Install Tail-Boom Rigging - TM-1-1670-260-12P_330
IG RECOVERY HELICOPTER
HOOK-UP AND RECOVERY FLIGHT OPERATIONS - TM-1-1670-260-12P_332
POST RECOVERY KIT PROCEDURES - TM-1-1670-260-12P_333
POST RECOVERY DISABLED HELICOPTER PROCEDURES - TM-1-1670-260-12P_334
Transmission Capability - TM-1-1670-260-12P_335
DISABLED UH-60 ONE-HOOK LONG-LINE RECOVERY PROCEDURES
RECOVERY FLIGHT PARAMETERS AND PRECAUTIONS - TM-1-1670-260-12P_337
Table 2. UMARK Components Required - TM-1-1670-260-12P_338
Figure 1. Disabled UH-60 and Recovery Helicopter Rigging - TM-1-1670-260-12P_339
Table 3. Disabled UH-60 and Recovery Helicopter Rigging Key to Figure 1 - TM-1-1670-260-12P_340
Rig and install blade sleeve assemblies - TM-1-1670-260-12P_341
Figure 2. Blade Sleeve Assembly Rigging and Installation - TM-1-1670-260-12P_342
Rig Shackle Assembly - TM-1-1670-260-12P_343
Figure 3. Rigging Shackle Assembly - TM-1-1670-260-12P_344
Install Tail-Boom Rigging - TM-1-1670-260-12P_345
RIG RECOVERY HELICOPTER - TM-1-1670-260-12P_346
Figure 4. Typical Cargo Hook Thimble Installation (Shown in Double-Eye Configuration) - TM-1-1670-260-12P_347
Allow end of sling line from recovery helicopter - TM-1-1670-260-12P_348
Allow end of sling line from recovery helicopter - TM-1-1670-260-12P_349
POST RECOVERY DISABLED HELICOPTER PROCEDURES - TM-1-1670-260-12P_350
Transmission Capability - TM-1-1670-260-12P_351
DISABLED UH-60 TWO-HOOK SHORT-LINE RECOVERY PROCEDURES
RECOVERY FLIGHT PARAMETERS AND PRECAUTIONS - TM-1-1670-260-12P_353
COMPONENTS REQUIRED - TM-1-1670-260-12P_354
Figure 1. Disabled UH-60 and Recovery Helicopter Rigging - TM-1-1670-260-12P_355
Table 3. Disabled UH-60 and Recovery Helicopter Rigging Key to Figure 1 - TM-1-1670-260-12P_356
Rig and install blade sleeve assemblies - TM-1-1670-260-12P_357
Figure 2. Blade Sleeve Assembly Rigging and Installation - TM-1-1670-260-12P_358
Rig Shackle Assembly - TM-1-1670-260-12P_359
Figure 3. Rigging Shackle Assembly - TM-1-1670-260-12P_360
Install Tail-Boom Rigging - TM-1-1670-260-12P_361
HOOK-UP AND RECOVERY FLIGHT OPERATIONS - TM-1-1670-260-12P_362
HOOK-UP AND RECOVERY FLIGHT OPERATIONS CONT.
POST RECOVERY KIT PROCEDURES - TM-1-1670-260-12P_364
POST RECOVERY DISABLED HELICOPTER PROCEDURES - TM-1-1670-260-12P_365
POST RECOVERY DISABLED HELICOPTER PROCEDURES CONT.
DAMAGED UH-60 MAIN ROTOR, MAIN TRANSMISSION, MAIN TRANSMISSION MOUNT DAMAGE ONE-HOOK LONG-LINE RECOVERY PROCEDURES
PRE-RECOVERY PROCEDURES - TM-1-1670-260-12P_368
COMPONENTS REQUIRED - TM-1-1670-260-12P_369
COMPONENTS REQUIRED CONT. - TM-1-1670-260-12P_370
Figure 1. Damaged UH-60 and Recovery Helicopter Rigging - TM-1-1670-260-12P_371
Install Forward Main Rigging - TM-1-1670-260-12P_372
Figure 2. Blade Sleeve Assembly Rigging and Installation - TM-1-1670-260-12P_373
Install Forward Main Rigging CONT.
Figure 3. Rigging Shackle Assembly - TM-1-1670-260-12P_375
RIG RECOVERY HELICOPTER - TM-1-1670-260-12P_376
HOOK-UP AND RECOVERY FLIGHT OPERATIONS - TM-1-1670-260-12P_377
POST RECOVERY KIT PROCEDURES - TM-1-1670-260-12P_378
DAMAGED UH-60 TAIL-BOOM DAMAGED ONE-HOOK LONG-LINE RECOVERY PROCEDURES
RECOVERY FLIGHT PARAMETERS AND PRECAUTIONS - TM-1-1670-260-12P_380
COMPONENTS REQUIRED - TM-1-1670-260-12P_381
Figure 1. Damaged UH-60 and Recovery Helicopter Rigging - TM-1-1670-260-12P_382
Table 3. Damaged UH-60 and Recovery Helicopter Rigging Key to Figure 1
COMPONENTS REQUIRED CONT.
Figure 2. Blade Sleeve Assembly Rigging and Installation - TM-1-1670-260-12P_385
COMPONENTS REQUIRED CONT. - TM-1-1670-260-12P_386
Figure 3. Rigging Shackle Assembly - TM-1-1670-260-12P_387
Install Tail-Boom Rigging - TM-1-1670-260-12P_388
RIG RECOVERY HELICOPTER - TM-1-1670-260-12P_389
HOOK-UP AND RECOVERY FLIGHT OPERATIONS - TM-1-1670-260-12P_390
POST RECOVERY KIT PROCEDURES - TM-1-1670-260-12P_391
PREVENTATIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
Figure 1. Sling Link Assembly Safety Wiring of Spring Lock
POST RECOVERY PROCEDURES
Figure 2. UMARK Usage Tracking Form
TOOLS AND EQUIPMENT
Table 1. Preventative Maintenance Checks and Services
Table 1. Preventative Maintenance Checks and Services (Continued)
Table 1. Preventative Maintenance Checks and Services (Continued) - TM-1-1670-260-12P_400
Table 1. Preventative Maintenance Checks and Services (Continued) - TM-1-1670-260-12P_401
Table 1. Preventative Maintenance Checks and Services (Continued) - TM-1-1670-260-12P_402
Table 1. Preventative Maintenance Checks and Services (Continued) - TM-1-1670-260-12P_403
REFERENCES
MAINTENANCE ALLOCATION CHART
Explanation of Columns in the MAC - TM-1-1670-260-12P_407
MAINTENANCE ALLOCATION CHART - UNIT MAINTENANCE AERIAL RECOVERY KIT
MAINTENANCE ALLOCATION CHART - UNIT MAINTENANCE AERIAL RECOVERY KIT CONT.
MAINTENANCE ALLOCATION CHART - UNIT MAINTENANCE AERIAL RECOVERY KIT CONT. - TM-1-1670-260-12P_410
MAINTENANCE ALLOCATION CHART - UNIT MAINTENANCE AERIAL RECOVERY KIT CONT. - TM-1-1670-260-12P_411
MAINTENANCE ALLOCATION CHART - UNIT MAINTENANCE AERIAL RECOVERY KIT CONT. - TM-1-1670-260-12P_412
REPAIR PARTS AND SPECIAL TOOL LIST INTRODUCTION
Source Code - TM-1-1670-260-12P_414
Table 2. Third Position Maintenance Code Definitions
Recoverability Code
Special Information - TM-1-1670-260-12P_417
REPAIR PARTS AND SPECIAL TOOL LIST ITEM LISTING
DESCRIPTION AND USABLE ONE CODES (UOC)
Figure 2. Heavy Weight Slings (94H520-1, 2)
DESCRIPTION AND USABLE ONE CODES (UOC) CONT. - TM-1-1670-260-12P_421
Figure 3. Adjustable Length Tie-Downs (94D521-1, -2)
DESCRIPTION AND USABLE ONE CODES (UOC) CONT. - TM-1-1670-260-12P_423
Figure 4. Ropes (94C522-1, -2)
DESCRIPTION AND USABLE ONE CODES (UOC) CONT. - TM-1-1670-260-12P_425
Figure 5. Blade Sleeves (94J516-1)
DESCRIPTION AND USABLE ONE CODES (UOC) CONT. - TM-1-1670-260-12P_427
Figure 6. Drogue Chute (1670EG029B3)
DESCRIPTION AND USABLE ONE CODES (UOC) CONT. - TM-1-1670-260-12P_429
Figure 7. Wedge Blocks (94D527-1, 94D528-1, 94D529-1, 94D530-1)
DESCRIPTION AND USABLE ONE CODES (UOC) CONT. - TM-1-1670-260-12P_431
Figure 8. Crossbar Assembly (94H501-1)
DESCRIPTION AND USABLE ONE CODES (UOC) CONT. - TM-1-1670-260-12P_433
Figure 9. Lifting Clevis Assembly (94D509-1)
DESCRIPTION AND USABLE ONE CODES (UOC) CONT. - TM-1-1670-260-12P_435
Figure 10. Shackle Assembly (94D514-1)
DESCRIPTION AND USABLE ONE CODES (UOC) CONT. - TM-1-1670-260-12P_437
Figure 11. Sling Link Assembly (94H523-1)
DESCRIPTION AND USABLE ONE CODES (UOC) CONT. - TM-1-1670-260-12P_439
Figure 12. Box Link Assembly (94C524-1)
DESCRIPTION AND USABLE ONE CODES (UOC) CONT. - TM-1-1670-260-12P_441
Figure 13. NBC Containers (21-4021-0804)
DESCRIPTION AND USABLE ONE CODES (UOC) CONT. - TM-1-1670-260-12P_443
Figure 14. Blade Pole Assembly (94J531-1)
DESCRIPTION AND USABLE ONE CODES (UOC) CONT. - TM-1-1670-260-12P_445
Figure 15. Cargo Hook Thimble (94C533-1)
DESCRIPTION AND USABLE ONE CODES (UOC) CONT. - TM-1-1670-260-12P_447

Western Governors University

Privacy Statement
Press Release
Contact

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business