SECTION I TM 1-1270-476-23P
19
d.
FABRICATION INSTRUCTIONS. Part numbers for bulk materials are referenced in the
description column of the line item entry for the item to be manufactured/ fabricated. Detailed
fabrication instructions for items source coded to be manufactured or fabricated are found in TM 1-
1270-476-30.
e.
ASSEMBLY INSTRUCTIONS. Detailed assembly instructions for items source coded to be
assembled from component spare/repair parts are found in TM 1-1270-476-30. Items that make up the
assembly are listed immediately following the assembly item entry or reference is made to an
applicable figure.
f.
KITS. Not applicable.
g.
INDEX NUMBERS. Not applicable.
h.
ASSOCIATED PUBLICATIONS.The publications listed below pertain to the AN/ASQ-170 and its
components.
PUBLICATION
SHORT TITLE
TM 1-1270-476-T
AVUM Troubleshooting Manual Target Acquisition Designation Sight
(TADS) Assembly
TM 1-1270-476-20
AVUM Maintenance, Target Acquisition Designation Sight (TADS)
Assembly
TM 1-1270-476-30
AVIM Maintenance, Target Acquisition Designation Sight (TADS)
Assembly
i.
ILLUSTRATIONS - LISTING. Higher - category RPSTL illustrations are not applicable.
j.
ELECTROSTATIC DISCHARGE SENSITIVE (ESDS) DEVICES. This technical manual contains
parts and assemblies sensitive to damage by ESD. MIL-STD-1285 should be consulted for specific
information on how damage can occur to electronic parts, assemblies and equipment by ESD and the
control measures to be taken to protect against such damage.
(1) Illustrations contained within this manual which depict ESDS parts are further identified by
the use of the following symbol affixed in the lower left-hand corner of each applicable illustration.
(2) Repair parts lists contained within this manual with ESD sensitive parts are identified by
the following symbol (ESDS). These symbols are placed in the extreme right of the Description and
Usable on Code (UOC) column for the item identified as ESDS.
