TM 55-1580-320-23 & P
3-38. LIMIT SWITCH DRIVE ASSY - REPAIR (cont)
3-38
3. Inspection.
a. Inspect for nicks, cracks, scratches and dents (refer to Task 2-11).
b. Inspect for corrosion (refer to Task 2-11).
c. Inspect electrical wiring for frayed and broken insulation. Check for cuts and tears.
d. Inspect electrical connector for bent, broken and missing pins.
e. Inspect for evidence of overheating and shorting.
f. Inspect gears for nicks, burrs, galling, pitting and uneven wear. Check for chipped or cracked teeth.
g. Inspect identification plates for legibility and security of attachment.
4. Repair. Repair of parts is limited to removal of minor nicks, burrs, scratches or other surface damage using aluminum
oxide cloth or fine abrasive. Clean part thoroughly after repair. If damage is extensive, or if minor repair will affect
serviceability, replace the part.
GO TO NEXT PAGE
3-131