TM 55-1680-320-23 & P
3-38. LIMIT SWITCH DRIVE ASSY - REPAIR (cont)
3-38
d. Remove front bearing (13) from shaft (3).
e. Remove shaft (3) and bearing (14) from bore of cluster gear (15) and gear (16). Remove rear bearing (13).
NOTE
Note and record number of shims (18) removed to aid in reassembly.
f. Remove bearing (17) from gear (16). Remove shims (18) from retainer (7).
g. Remove cover (19) from housing (20) by removing screws (21) and washers (22).
h. Disconnect electrical wiring and remove switch (23) by removing cap (24), washer (26) and nut (25).
GO TO NEXT PAGE
3-128